It can use glue specialized on countertop to fill and polish by machine.
Repair by installer under the help of abrasive disc.
Firstly, check the if the screw are tight? Secondly, check the leavel of carcass. Thirdly, adjust the door panel.
Use concolorous wooden paint beauty cream to repair the scratchs.
Use sand paper (more than 300#) to rubdown the scratch, then use polishing machine to polish it.
It should protect the installed products by vinyl warp. If there is sand and dust,you can use specialized detergents “WD-40”rather than water or wet rag to avoid rust.
Normally for three-section runner, the drawer box drops from the runner, please reinstall them.
Take out the drawer to check if the pair of slide is not in same level or position; if it is, please reinstall them again.
Mix the use of screws for kitchen and wardrobe, the thickness of kitchen side panel is 16mm but it is 18mm for wardrobe. Please put different hardware in different area in the tool box
Ans: 1) There is plastic foil on the door surface which can protect it from scraping. If you see the scratch when you open the packing, please take photos and e-mail to our sales representative as soon as you can. 2) 3 notes for storage of lacquer door panel: 1) don’t stack up door panels; […]